Home
Products
Watch Camera
SD CARD MINI DVR
HD FPV DVR
HD1080P SD Card DVR 1CH
CCTV DVR Board 1CH
CCTV PCB Board 2CH
1CH SD Card Mini DVR
2CH SD Card Micro DVR
SD Card Mobile DVR 1CH
HD Vehicle Recorder 2CH
HD Spy Watch Camera
HD720P Nightvision Watch Camera
HD1080P Nightvision Watch Camera
WIFI Smart Watch Camera
News
Support
Download
Contact Us

Support 


Quality Assurance :

For every product, it is processed with Seven Level Testings :

1) IQC test for raw material.
2) QC testing for semi-finished products.
3) FQC testing  .
4) QC finished product testing.
5) aging testing .
6) QC testing each unit
7) Final QA random Test for finished package

Warranty :

SWORSCHE TECHNOLOGY Co., Limited. Grants a 1 year WARRANTY  from the purchase date, the operation of the products against defects in materials and the workmanship used in the manufacture. 

Our warranty covers the repair, replacement, or exchange of the product and/or its
components .
 
** THIS WARRANTY WILL NOT BE VALID IN THE FOLLOWING SCENARIOS **
 
1. When the use, care and operation of the product is not in accordance with the instructions contained in the operating manual.
2. When the product has been used exceeding its capacity, abused, beaten and / or exposed to poor storage conditions.
3. When the product has been disassembled, modified or repaired by unauthorized persons by SWORSCHE TECHNOLOGY Co., Limited.
HD WATCH CAMERA INSTRUCTION

Getting Started

 

The first stepin using your device is charging it.Unscrew the

cover knob over the USB adapter port to connect the device

to a USB port on your PC,or plug it into AC power with the

included adapter.Be sure that the adapter jack is plugged

all the way into the watch's port.While charging,the LED

indicator will be solid red and flash blue.It will become solid

when the battery is full.Before first use,we suggest charging

the device for 4-6 hours.

 

To set the time on the watch face of your device,gently pull

the Time Set knob out slightly from the watches body.Turn the

knob adjust the time,and then push it back in.

 

Recording Video

 

With the device in Standby Mode,press the Power/Video

button.The LED indicator will blink blue 3 times,and then go

out to indicate that it is recording video.To stop recording and

save the current file,press the Power Video button twice.The

LED indicator will return to solid blue.

Always be sure to stop recording before powering the device

off.If you do not,there is a risk of the file being corrupted.

 

Capturing Photos

While in Standby Mode,press the Photo/Audio button,the 

LED indicator will blink red to indicate that it is taking a photo,

and return to solid blue when it has been stored.

 

If it is not automatically detected,click Start on your desktop.

Select My Computer if you are not using Windows XP,or 

Computer if using Windows Vista or Windows 7.The device

should be listed as a Removable Disk under the Devices with

Removable Storage section.Open that drive,which will contain 

a folder called DCIM.Within the DCIM folder will be another

folder named 100DSCIM.This folder will contain all your recorded

files.

 

As mentioned earlier,we suggest using VLC Player to play 

back video filders.

 

After you have loaded the file ,safely disconnect the device

from your computer,turn the device on and off,and the time

and date you loaded should appear on any new videos and 

photos you record.

 

Troubleshooting

 

Problem: The device seems to have frozen and isn't reacting

when any buttons are pressed.

 

Solution: This usually occurs if the device receives too many

commands in too short a time.To reset the device,press the 

Power/Video and Photo/Audio buttons at the same time.The

device should be reset and power off.

To view your files on your computer,we suggest using VLC

Player.The most recent version can be downloaded at no 

cost from http://www.videolan.org.

 

To power the device on,press the Power/Video button for

2-3 seconds.The LED indicator will turn purple to a few

seconds while the device boots and then blue to indicate it

is in Standby mode.To power the device off,hold down the

Power/Video button for 2-3 seconds.The LED will blink red

several times and go out.

The know convering the microphone has a hold in it,which allows the device to capture audio.This compromises its ability to withstand moisture.If you require the device waterproof,unscrew the knobcovering the microphone and replace it with the solid cover included in the box.Using this watertight cover will inhibit the Spy Watch's ability to record audio.

 

Recording Audio

 

In Standby Mode,hold down the Photo/Audio button for 2-3 

seconds.The LED indicator will blink red while the device

records audio.Press the button again to stop recording and

return to standby.

 

Reviewing Files on a Computer

 

To view your files on a computer,simply connect the device

via the supplied USB cord,making sure the device is powered

off.It will connect as a removable drive,and depending on the 

settings on your PC,it may automatically notify you that new hardware

has been detected.If so,select Open Folder to view files.

 

Setting Time and Date Stamp

 

Setting the time and date stamp on your device is easy.

Simply create a .txt file on your computer and name it

"time".In that file you will enter the date and time in the 

following format:year.month.day hour.minute.second Y or N.

(Ex.2011.01.31 12.00.00 Y).Y means the time stamp will be

on.N will turn the time stamp off.

 

Once you've created the file,connect the device to your

computer via USB and save the .txt file to the device's root

directory.When you connect the device to your computer,it

will be assigned a drive letter(ex. ​C:,D:,E:,).When you open

that drive,you are in the root directory,or top most level of 

the drive

 

Problem: When playing back my video,i can hear audio,but

have no video.

 

Solution : This most often occurs if your computer's media

player is having trouble with your files.Try using VLC player.

which can be downloaded for free at http://videolan.org.

 

Problem: My video playback is "choppy" or "stuttering".

 

Solution: If this is occurring,try copying the video files to your

PC.This happens when the file is too large to be played back

using your USB connection.


Home  |  Products  |  Watch Camera  |  SD CARD MINI DVR  |  HD FPV DVR  |  HD1080P SD Card DVR 1CH  |  CCTV DVR Board 1CH  |  CCTV PCB Board 2CH  |  1CH SD Card Mini DVR  |  2CH SD Card Micro DVR  |  SD Card Mobile DVR 1CH  |  HD Vehicle Recorder 2CH  |  HD Spy Watch Camera  |  HD720P Nightvision Watch Camera  |  HD1080P Nightvision Watch Camera  |  WIFI Smart Watch Camera  |  News  |  Support  |  Download  |  Contact Us  |  Sitemap  |  Mobile Version
Powered by DIYTrade.com
HomeContact UsSitemap